bunch of parts
#21
Platinum Member
Platinum Member
Thread Starter
#24
Registered
Hi Tom,
If you still have the drive plates do you think they would be OK to use with a couple of 600hp engines? Also if you haven't sold the Swim PF - shipping to 49675. Probably pretty pricey but if you get a chance I would appreciate it.
Thanks,
John
If you still have the drive plates do you think they would be OK to use with a couple of 600hp engines? Also if you haven't sold the Swim PF - shipping to 49675. Probably pretty pricey but if you get a chance I would appreciate it.
Thanks,
John
Last edited by getrdunn; 12-03-2011 at 12:01 PM.
#25
Registered
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 7 Likes
on
7 Posts
Tom,
Looks like the brackets are located at 26" & 42" from the outside of the platform? I take it the brackets are symmetric! what's the thickness of the actual platform? As you can see by my photo, I don't have a lot of space between the rub rail and the top of the exhaust.
#26
Platinum Member
Platinum Member
Thread Starter
John, 600 would be no problem for those drive plates. I ran the same ones in my cig with 600 hp for 7 yrs. will get you a price on shipping on the platform. Tom
#27
Platinum Member
Platinum Member
Thread Starter
Tom,
Looks like the brackets are located at 26" & 42" from the outside of the platform? I take it the brackets are symmetric! what's the thickness of the actual platform? As you can see by my photo, I don't have a lot of space between the rub rail and the top of the exhaust.
Looks like the brackets are located at 26" & 42" from the outside of the platform? I take it the brackets are symmetric! what's the thickness of the actual platform? As you can see by my photo, I don't have a lot of space between the rub rail and the top of the exhaust.
#29
Platinum Member
Platinum Member
Thread Starter
#30
Platinum Member
Platinum Member
Thread Starter
Tom,
Looks like the brackets are located at 26" & 42" from the outside of the platform? I take it the brackets are symmetric! what's the thickness of the actual platform? As you can see by my photo, I don't have a lot of space between the rub rail and the top of the exhaust.
Looks like the brackets are located at 26" & 42" from the outside of the platform? I take it the brackets are symmetric! what's the thickness of the actual platform? As you can see by my photo, I don't have a lot of space between the rub rail and the top of the exhaust.