HP 500 Carbs, K&N Flame Arrestors, 502 mag oil cooler
#12
Registered
Join Date: Jul 2012
Location: Delaware
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
#13
Registered
Thread Starter
Emails sent
Both carbs sold and shipped
I have a satin finish hydromotive 24 pitch 3 blade prop available. $175 standard bravo hub
Also a couple of used flat tappet cams for Gen 5 502 MPI motors.
10 hours on a custom Howard Cam 544/553 lift, 232/238 Duration on a 112 center.
35 Hours on a custom Billet Racing Cam 550/558 lift, 231/239 Duration on a 114 center. Cam set up from Mark from Precision marine.
No lifter, engine guy threw them out.
Thank
Both carbs sold and shipped
I have a satin finish hydromotive 24 pitch 3 blade prop available. $175 standard bravo hub
Also a couple of used flat tappet cams for Gen 5 502 MPI motors.
10 hours on a custom Howard Cam 544/553 lift, 232/238 Duration on a 112 center.
35 Hours on a custom Billet Racing Cam 550/558 lift, 231/239 Duration on a 114 center. Cam set up from Mark from Precision marine.
No lifter, engine guy threw them out.
Thank