Gen 6 502 block, heads, studs
#1
Registered
Thread Starter
Join Date: Jun 2010
Posts: 884
Likes: 0
Received 0 Likes
on
0 Posts
Gen 6 502 block, heads, studs
Gen 6 502 block, std bore, deck and mains, no rot. Seasoned and ready to build. $900 + ride
REAL Hp 500 heads. Ported by Spyder Performance. Good condition. $500+ ride
ARP head studs for BB chevy bowtie ect.. with Dart, AFR, CAnfield heads see part # on box. NEW! $115+ride
REAL Hp 500 heads. Ported by Spyder Performance. Good condition. $500+ ride
ARP head studs for BB chevy bowtie ect.. with Dart, AFR, CAnfield heads see part # on box. NEW! $115+ride
#4
Registered
Join Date: Jan 2008
Location: Paw Paw MI.
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
gen 6 block
How are bores? straight? what are all the measurements on each bore? please supply as #1= #2= #3= #4= #5= #6= #7= #8= Main sizes on journals with caps toqued to spec. has block been decked? how much if so? what is deck height of block? Jeff 269-998-5914
#5
Registered
Thread Starter
Join Date: Jun 2010
Posts: 884
Likes: 0
Received 0 Likes
on
0 Posts
Bores straight, 4.468-4.470 best I remember. I dont have any torque plates to give you the exact bore measurement your requesting. Same on the mains. The block is not a bowtie its a Gen VI so 9.8 deck height and has not been cut. When tore down all components were standard HP500.