Gen V Rotating Assemblies
#1
VIP Member
VIP Member
Thread Starter
Join Date: Nov 2008
Location: Bend Oregon
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
Gen V Rotating Assemblies
Just throwing these out there:
Have two complete rotating assemblies, GM forged, one piece rear mains, 4.00 stroke, standard standard.
Eagle SIR 6.135 rods bushed on one set.
Scat I beams 6.135 bushed on the other set.
JE 4.280 forged pistons domed 23cc. Part # 212135
This make 9.5 to 1 to 10 to 1 with 119 heads.
These are complete, balanced assemblies with balancers and flywheels 60 hours.
So one crank, eight rods, eight pistons, balancer and flywheel per set.
I know shipping will be crazy so the closer to the northwest you are the better. $600.00 a set
Have two complete rotating assemblies, GM forged, one piece rear mains, 4.00 stroke, standard standard.
Eagle SIR 6.135 rods bushed on one set.
Scat I beams 6.135 bushed on the other set.
JE 4.280 forged pistons domed 23cc. Part # 212135
This make 9.5 to 1 to 10 to 1 with 119 heads.
These are complete, balanced assemblies with balancers and flywheels 60 hours.
So one crank, eight rods, eight pistons, balancer and flywheel per set.
I know shipping will be crazy so the closer to the northwest you are the better. $600.00 a set
Last edited by Throttle Fever; 01-23-2013 at 09:38 AM.
#5
VIP Member
VIP Member
Thread Starter
Join Date: Nov 2008
Location: Bend Oregon
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts