TRS Drive, Complete
#1
Registered
Thread Starter
TRS Drive, Complete
TRS outdrive, complete from inner transom plate to prop shaft. 1.50 ratio LH. Ran as left-hand entire life behind my Cig 20 (3,000# hull) with a small block. Drive was opened up last season for inspection and passed with no issues. Replaced seals and prop shaft carrier at that time, under 5 hours ago. Merc Trans input shaft that could easily be converted to Borg-Warner style.
$1,300 OBO + shipping from 65020
Pics available via text (nine one 3 - 7 zero 8 - two 3 one eight) or via email tbarta26 "at" hotmail.com
Merc Trans available as well.
$1,300 OBO + shipping from 65020
Pics available via text (nine one 3 - 7 zero 8 - two 3 one eight) or via email tbarta26 "at" hotmail.com
Merc Trans available as well.
#3
Registered
Thread Starter
TTT
$1300 too much? Make a decent offer and it can be yours. This needs to go!
Very low investment for a spare drive to get you back on the water quick if you break one.
$1300 too much? Make a decent offer and it can be yours. This needs to go!
Very low investment for a spare drive to get you back on the water quick if you break one.
Last edited by Holy Smokes; 12-05-2013 at 09:22 AM.
#8
Registered
Thread Starter
Is suggest going through Freightquote.com for a LTL quote to your destination. I would expect in the range of $100 - $200 max. For reference I freight shipped my complete engine and B1 drive on two separate pallets from NY to MO for $350.
#9
Registered
Thread Starter