Tie Bar off XR drives - 32" center-to-center.
#1
Registered
Thread Starter
Tie Bar off XR drives - 32" center-to-center.
I have a nice clean tie-bar that came off my boat that did have XR's on it. It is 32 center to center but does adjust some. $150 + Shipping.
[ATTACH=CONFIG]515674[/ATTACH][ATTACH=CONFIG]515670[/ATTACH][ATTACH=CONFIG]515671[/ATTACH][ATTACH=CONFIG]515672[/ATTACH][ATTACH=CONFIG]515673[/ATTACH]
[ATTACH=CONFIG]515674[/ATTACH][ATTACH=CONFIG]515670[/ATTACH][ATTACH=CONFIG]515671[/ATTACH][ATTACH=CONFIG]515672[/ATTACH][ATTACH=CONFIG]515673[/ATTACH]
#6
Registered
Thread Starter
#7
Registered
Thread Starter
I measured again and took pictures with a tape measure. It's 31.75" exactly center to center of bolt holes. There is .75-1" of adjustment showing on threads. Meaning it could easy adjust in to what you need, but may not adjust out greater than the .75-1" if someone needed lets say 32.5". It should work fine for you. I'll post pics in the morning.
#8
Registered
Thread Starter
Katanna, Here are some pictures showing how it could easily adjust to 31.5".
[ATTACH=CONFIG]515962[/ATTACH][ATTACH=CONFIG]515963[/ATTACH][ATTACH=CONFIG]515961[/ATTACH][ATTACH=CONFIG]515960[/ATTACH]
[ATTACH=CONFIG]515962[/ATTACH][ATTACH=CONFIG]515963[/ATTACH][ATTACH=CONFIG]515961[/ATTACH][ATTACH=CONFIG]515960[/ATTACH]