330 parts motor
02-24-2014, 08:23 AM
#1
Registered
Thread Starter
330 parts motor
$400 plus shipping for the whole motor
Bell housing $100
Coupler $150, splines like new, has the steel snout.
Old style tbolt 4 ign with engine harness $60
Distributor with cap rotor and wires $75
Ps pump with bracket $100
Starter $25
Alt $25
Motor is complete so if you need something let me know.
[email protected]
Bell housing $100
Coupler $150, splines like new, has the steel snout.
Old style tbolt 4 ign with engine harness $60
Distributor with cap rotor and wires $75
Ps pump with bracket $100
Starter $25
Alt $25
Motor is complete so if you need something let me know.
[email protected]
02-24-2014, 08:35 AM
#2
Registered
Gold Member
Jamie, Can you get me the part # off of the engine harness and is it 9 prong 3 large and 6 small? number should be on the square four bolt flange or on a white tag on the loom. Also, do you have the circuit breaker and solenoid on the bracket? Thanks, George
Last edited by OLD MAN; 02-24-2014 at 08:38 AM.
02-24-2014, 08:42 AM
#3
Registered
Thread Starter
I have all of that George, ill check the part number now
02-24-2014, 08:44 AM
#4
Registered
Thread Starter
8494111a5 9 pins
02-24-2014, 09:47 AM
#6
Registered
Thread Starter
88 I/o
02-24-2014, 01:08 PM
#8
Registered
Thread Starter
This has been the only one I ran into that was different.
