CUT Rev4 Props for sale
#1
Registered
Thread Starter
Join Date: Oct 2013
Location: Cape Coral, FL
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
CUT Rev4 Props for sale
FOR SALE:
Mercury Revolution 4 props -
(2) 23 (one left/one right) - pair of counter rotating Rev4 props - 23 pitch back-cut by Rich at Leading Edge make the props act like Rev4 22's
(2) 25 (one left/one right) - pair of counter rotating Rev4 props - 25 pitch back-cut by Rich at Leading Edge make the props act like Rev4 24's
I own a quad-300 Verado boat and wanted some more RPM out of my 23 outer/25 inner Rev4 combo. As it turns out, I ended up gaining 130RPM but lost 4mph on top-end speed. The cut props performed tremendously in hole shots and even got the boat up on plane with only 2 of 4 motors but I gave up too much top end speed for my liking. I am trying to sell the props in pairs if at all possible. If you have tried spinning a Rev4 23 or 25 combo and found them a tad hard to turn, these may be just what you need, rather than dropping down to the next lower odd numbered increment Rev4.
Please let me know if you are interested. I am asking $750 per pair.
Mercury Revolution 4 props -
(2) 23 (one left/one right) - pair of counter rotating Rev4 props - 23 pitch back-cut by Rich at Leading Edge make the props act like Rev4 22's
(2) 25 (one left/one right) - pair of counter rotating Rev4 props - 25 pitch back-cut by Rich at Leading Edge make the props act like Rev4 24's
I own a quad-300 Verado boat and wanted some more RPM out of my 23 outer/25 inner Rev4 combo. As it turns out, I ended up gaining 130RPM but lost 4mph on top-end speed. The cut props performed tremendously in hole shots and even got the boat up on plane with only 2 of 4 motors but I gave up too much top end speed for my liking. I am trying to sell the props in pairs if at all possible. If you have tried spinning a Rev4 23 or 25 combo and found them a tad hard to turn, these may be just what you need, rather than dropping down to the next lower odd numbered increment Rev4.
Please let me know if you are interested. I am asking $750 per pair.