SSM #4 drives and Gimbals/transom assemblies
#11
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I`m keeping the Spacers .
With the Arneson adapter the prop does get moved back a little bit .
With the Arneson adapter the prop does get moved back a little bit .
#16
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Props are sold. drives will be available after the temps gets above 60* .. so a few months .
#19
Registered
Join Date: Oct 2006
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I have a pair of #3s that are ready for a rebuild and I need a gear ratio change. May be better off with your #4s. I know they are shorter and thats good. My prop shafts are 3 inches below running surface. Can have picked up / Alex 410 570 8250