Mr. Cool Oil Coolers
#1
Registered
Thread Starter
Mr. Cool Oil Coolers
I have 2 different used oil coolers for sale
1 Mr. Cool MRC CPH-550 Single Cooler 3 inch bundle, 18 inch overall length, 3/4 oil fittings, 1" water fitting (you can screw in push on barbs in needed) with a working pressure of 150 PSI and 700 HP. Used for 1 season on 753hp with zero issues. I upgraded to the CPH-555 but it didn't make any difference because my oil thermostat regulates the temp, just one of those things I had to try anyways. I am confident this is a good oil cooler and worth going to a good home. Cost $420 new Asking $250
1 SEN-DUR 1928-50-5 oil cooler, 3" bundle, push on water hoses, 3/4 oil fittings, good used condition but I do not know the history and can not guarantee how clean it is. Some people do not recommend re-using oil coolers but others believe you can clean them out good. Cost about $400 new asking $100
1 Mr. Cool MRC CPH-550 Single Cooler 3 inch bundle, 18 inch overall length, 3/4 oil fittings, 1" water fitting (you can screw in push on barbs in needed) with a working pressure of 150 PSI and 700 HP. Used for 1 season on 753hp with zero issues. I upgraded to the CPH-555 but it didn't make any difference because my oil thermostat regulates the temp, just one of those things I had to try anyways. I am confident this is a good oil cooler and worth going to a good home. Cost $420 new Asking $250
1 SEN-DUR 1928-50-5 oil cooler, 3" bundle, push on water hoses, 3/4 oil fittings, good used condition but I do not know the history and can not guarantee how clean it is. Some people do not recommend re-using oil coolers but others believe you can clean them out good. Cost about $400 new asking $100