Alpha one ss out drive
#1
![Default](/forums/images/icons/icon1.gif)
alpha one ss outdrive, mecrusier orginal in very good condition, fresh water use only... bolt on 5-8 mph in under 1.5hrs. The holy grail... quick sale $2500 or best offer ![](https://cimg5.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/920x2000/d7f443b6_2ef4_415b_a7fe_7a6307e5c353_142fdb0b3a7bf0d0ddf76d47b0071d1790b790d2.png)
![](https://cimg5.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/920x2000/d7f443b6_2ef4_415b_a7fe_7a6307e5c353_142fdb0b3a7bf0d0ddf76d47b0071d1790b790d2.png)
#2
Registered
![Default](/forums/images/icons/icon1.gif)
I actually used to race one of these on a 22ft Velocity in A-class. As long as your not putting a ton of torque through it, it is a great drive. I put 500hp through mine at 7200rpm and 93mph.
I also bolted mine onto a friends velocity and it gained 8mph from his standard Alpha.
These are 3.5" shorter than a standard alpha and have the 2.4 liter outboard crescent gear case with low water pickup. I ran mine on the surface with a cleaver prop.
I don't know the seller, but do know these rare drives. If anyone wants to ask questions in general about these drives feel free to call me. 239-443-8233
I also bolted mine onto a friends velocity and it gained 8mph from his standard Alpha.
These are 3.5" shorter than a standard alpha and have the 2.4 liter outboard crescent gear case with low water pickup. I ran mine on the surface with a cleaver prop.
I don't know the seller, but do know these rare drives. If anyone wants to ask questions in general about these drives feel free to call me. 239-443-8233
#3
![Default](/forums/images/icons/icon1.gif)
2.5 inches shorter not 3.5
I gained 10 MPH when I bolted one onto my Glastron.
But I had 500+ HP also and could snap the drive at will.
ended up selling the boat.
My best speed was 94
I gained 10 MPH when I bolted one onto my Glastron.
But I had 500+ HP also and could snap the drive at will.
ended up selling the boat.
My best speed was 94
#5
Registered
![Default](/forums/images/icons/icon1.gif)
They came with HD upper gearsets. The shorter vertical driveshaft is NLA from merc. It had a recessed oring groove near the upper splines. When overpowered, this was a common breakage point. The cases are also NLA. Standard Alpha gears/bearings in lower.
Ran one from 08-2014 on a 383 500hp 21' Challenger. 5mph & 500rpm gain with no prop work. Member SB here is still kicking s***! with it.
#7
Registered
![Default](/forums/images/icons/icon1.gif)
Correct 2.5" shorter than a std alpha.
They came with HD upper gearsets. The shorter vertical driveshaft is NLA from merc. It had a recessed oring groove near the upper splines. When overpowered, this was a common breakage point. The cases are also NLA. Standard Alpha gears/bearings in lower.
Ran one from 08-2014 on a 383 500hp 21' Challenger. 5mph & 500rpm gain with no prop work. Member SB here is still kicking s***! with it.
https://youtu.be/gbnBNN3NjGY
They came with HD upper gearsets. The shorter vertical driveshaft is NLA from merc. It had a recessed oring groove near the upper splines. When overpowered, this was a common breakage point. The cases are also NLA. Standard Alpha gears/bearings in lower.
Ran one from 08-2014 on a 383 500hp 21' Challenger. 5mph & 500rpm gain with no prop work. Member SB here is still kicking s***! with it.
https://youtu.be/gbnBNN3NjGY
i watched a few of your bopper videos, always wondered what the stats on the boat were.
#8
Registered
![Default](/forums/images/icons/icon1.gif)
$2500 is a great price ! This was the quick sale price 5-10yrs ago. Some where getting $3000 but had to wait longer to sell.
If no action here (mostly BBC I/O's and outboard boats on OSO) I'd go to the Donzi site. Should be fast sale there. Like, real fast.
These don't come up for sale much. Sometimes takes a few yrs to find one.
I heard the same !
If no action here (mostly BBC I/O's and outboard boats on OSO) I'd go to the Donzi site. Should be fast sale there. Like, real fast.
These don't come up for sale much. Sometimes takes a few yrs to find one.
I heard the same !
![Smilie](/forums/images/smilies/smile.gif)