10 Meter Fountain ssm 3 no power
07-18-2019, 06:52 PM
#1
Registered
Thread Starter
10 Meter Fountain ssm 3 no power
1983 10 meter fountain
Cockpit and full covers
Full stereo with 2 Rockford amps
Livorsi chrome throttles
Cmi split top headers
Ssm 3 drives and transom assemblies fresh paint, under 20 hours since rebuild at speedmasters, had receipts gave to a guy that left deposit and never came back. Used for less than 20 hours no issues, clean fluid
No inner plates
Marine machine steering with
2 pumps and tie bar
Gil bellhousings, and motor mounts
16 3/4 x27 4 blade props
Huber 1330 trans under 20 hours. I had them apart, and went through, used for under 20 hours. Still have coolers and lines on them.
Large aluminum sea strainers
Corbeau sit down seats
Aluminum triple axle trailer no paperwork
Wolverine k planes bigger than 380’s
Cockpit and full covers
Full stereo with 2 Rockford amps
Livorsi chrome throttles
Cmi split top headers
Ssm 3 drives and transom assemblies fresh paint, under 20 hours since rebuild at speedmasters, had receipts gave to a guy that left deposit and never came back. Used for less than 20 hours no issues, clean fluid
No inner plates
Marine machine steering with
2 pumps and tie bar
Gil bellhousings, and motor mounts
16 3/4 x27 4 blade props
Huber 1330 trans under 20 hours. I had them apart, and went through, used for under 20 hours. Still have coolers and lines on them.
Large aluminum sea strainers
Corbeau sit down seats
Aluminum triple axle trailer no paperwork
Wolverine k planes bigger than 380’s
$16,000 obo for all. Will separate and part out. Email if interested [email protected]
07-18-2019, 06:57 PM
#2
Registered
Thread Starter
Having trouble loading additional pictures.
07-19-2019, 05:28 AM
#3
Registered
Thread Starter
07-19-2019, 06:53 AM
#4
Platinum Member
Platinum Member
pics of the cmi headers ?
07-19-2019, 08:19 AM
#5
Registered
Thread Starter
07-23-2019, 08:07 AM
#6
Registered
Thread Starter
Bump
07-24-2019, 08:41 AM
#7
Registered
Thread Starter
Have some interest in the hull. Would like to have a buyer for the hull before splitting up the rest of the parts, but I’m not going to sit on everything forever either.
Rigged hull on the trailer $7000
Ssm 3’s with gimbals $7000
rolla props $1800
cmi headers $3000
huber 1330 trans $1000 ea, 1700 for the pair.
Rigged hull on the trailer $7000
Ssm 3’s with gimbals $7000
rolla props $1800
cmi headers $3000
huber 1330 trans $1000 ea, 1700 for the pair.
07-29-2019, 07:01 AM
#8
Registered
Thread Starter
Bump
07-30-2019, 12:58 PM
#9
Registered
Thread Starter
Starting to take it apart
id like to leave the hull rigged with gauges and wiring,
id like to leave the hull rigged with gauges and wiring,
07-31-2019, 12:30 PM
#10
Registered
Thread Starter
Listed drives in a separate thread make an offer on the hull. Want this stuff to move
