1990/2020 308 Profile,race pleasure
#1
Registered
Thread Starter
1990/2020 308 Profile,race pleasure
This is the original PRINTERS DEVIL race boat I bought 14 years ago, it was in need of everything so I worked on it here and there over the years it is now very close to done.
The boat in new front to back. Interior, gauges,cables,wiring,transom,stringers transom assm,and fresh drives bravo one with full to the helm hyd steering.
The boat was very fast in its day running upper 70s with stock 365 hp merc mags,she ran the great lakes from 90 till early 2000 ended up in Kentucky under the name PLUMB QUICK racing were she had softened up on the transom and was stripped and left for dead.
I bought her with planes to bring her back to life it just took longer then anticipated
I have a pair of closed cooling 496 HO's that are ready to drop in.
Boat on a tri axle trailer with full interior,gauges ,steering, motor mounts,280k planes and transom assemblies 20.000
Boat on a tri axle trailer with full interior,gauges ,steering.motor mounts 280k planes,transoms B1 drives,496 HOs complete you finish 35.000
Boat on a tri axle trailer with full interior,gauges ,steering.motor mounts 280k planes,transoms B1 drives,496 HOs turn key 40.000 this spring.
all your friends mode
you can pull the scoops on the new hatch and still have the pads on the back
race mode
race mode
race throttles in
race throttles out
dance floor fig
you and two girls config
loose parts in pic
loose parts in pic
The boat in new front to back. Interior, gauges,cables,wiring,transom,stringers transom assm,and fresh drives bravo one with full to the helm hyd steering.
The boat was very fast in its day running upper 70s with stock 365 hp merc mags,she ran the great lakes from 90 till early 2000 ended up in Kentucky under the name PLUMB QUICK racing were she had softened up on the transom and was stripped and left for dead.
I bought her with planes to bring her back to life it just took longer then anticipated
I have a pair of closed cooling 496 HO's that are ready to drop in.
Boat on a tri axle trailer with full interior,gauges ,steering, motor mounts,280k planes and transom assemblies 20.000
Boat on a tri axle trailer with full interior,gauges ,steering.motor mounts 280k planes,transoms B1 drives,496 HOs complete you finish 35.000
Boat on a tri axle trailer with full interior,gauges ,steering.motor mounts 280k planes,transoms B1 drives,496 HOs turn key 40.000 this spring.
all your friends mode
you can pull the scoops on the new hatch and still have the pads on the back
race mode
race mode
race throttles in
race throttles out
dance floor fig
you and two girls config
loose parts in pic
loose parts in pic
#2
Registered
Thread Starter
This will be a fast versatile boat,delta pad notched transom all configurations store in the nose of the cover girl cabin that will sleep two or three great.
Offers considered this is my personal boat that got put on hold through the years because of other good deals but now its time to go post or P M any questions.
Offers considered this is my personal boat that got put on hold through the years because of other good deals but now its time to go post or P M any questions.
#5
Registered
Hi Lightening jet, interested in some pics of the side and a straight on of transom area. Where are you/boat located? Send pics/text to 989-289-9240. Thanks, Todd Buchanan
#7
Registered
Thread Starter
This project will be in the water early spring so if anyone wants to save some money now is the time if you want to finish it your self.
Progress update trim panel is wired and installed, power steering to the helm done dual pump set up,tabs on and all cables run, trim pumps done this week tic toc kids
Progress update trim panel is wired and installed, power steering to the helm done dual pump set up,tabs on and all cables run, trim pumps done this week tic toc kids
#8
Following
Hey REALLY nice work!!! I pulled the trigger on a 1998 29' Profile with twins - I'm in the process of replacing the transom - balsa core was not sealed properly, but floors and stringers are solid - has a notched transom -
I'll be following your posts - GLWS
I'll be following your posts - GLWS
#9
Registered
Thread Starter
She is coming along nicely should be setting motors in a week or so,if no one jumps on this thing i'll run it this summer while I put the 12 meter back together.
Hey Moores where do you boat at?
Hey Moores where do you boat at?