Forged mk IV 454 crank- Make reasonable offer
#1
Platinum Member
Platinum Member
Thread Starter
Forged mk IV 454 crank- Make reasonable offer
Forged 454 crankshaft. 2 piece rear main seal, external balance
With calipers the crank has these measurements
Mains
#1 2.738
#2 2.738
#3 2.737
#4 2.736
#5 2.736
Rods
1-2 - 2.186
3-4 - 2.188
5-6 - 2.188
7-8 - 2.188
Out of a 1980 mk IV 370 HP Mercruiser engine
- MAKE REASONABLE OFFER
Shipping would be from 48080
With calipers the crank has these measurements
Mains
#1 2.738
#2 2.738
#3 2.737
#4 2.736
#5 2.736
Rods
1-2 - 2.186
3-4 - 2.188
5-6 - 2.188
7-8 - 2.188
Out of a 1980 mk IV 370 HP Mercruiser engine
- MAKE REASONABLE OFFER
Shipping would be from 48080
Last edited by phughes69; 12-06-2020 at 05:29 PM.
#2
Registered
just a fyi,both main&rod journals have been ground .010 undersize.this information is based on your measurements.
The following users liked this post:
dykstra (12-08-2020)
#3
Registered
if you will take 175.00 for it i will send someone to pick it up.i can pay anyway you want.
#4
Registered
patrick,check hit the mailbox this morning.