AGM batt rack
#1
Registered
Thread Starter
AGM batt rack
This AGM battery rack was made by skater for a 36 quite a few years ago and was shortly used in a 28 Daytona. It is a solid piece of 1 inch billet bottom and the entire thing has been hard anodized. Dimensions are 37" x 11" x 7-1/4" tall. I vaguely remember the this piece costing over 2K to fab at the time.
Batt slot/recess-
6-5/8" W and it looks like the batteries that were in it were 6 1/2 W
31-1/4 L so 7.75" ish x 4.
Looks like the batteries were 7.5" ish
6-3/4" tall max (could easily be spaced up a little and the recess will accept as low as 6")
It's very nice $400 plus whatever shipping
Batt slot/recess-
6-5/8" W and it looks like the batteries that were in it were 6 1/2 W
31-1/4 L so 7.75" ish x 4.
Looks like the batteries were 7.5" ish
6-3/4" tall max (could easily be spaced up a little and the recess will accept as low as 6")
It's very nice $400 plus whatever shipping