BY U BOY

I SAW THAT ONE BUT FIGURED AFTER THE BIDDING WAR AND SHIPPING I COULD BUY IT FROM THE MANU.

jeff1000man

Do you still have those studs you bought? I think mine came with studs but it wouldn't hurt to still have them just in case. Did you get the Merlin head bolts? You will need 8. Also you need to make sure your new ARP head bolts come with those 4 slightly shorter bolts or you will need to put double washers on those 4 bolts. There is not enogh extra thread on those bolts to get them torqued right. You will have 8 extra washers in the set because the Merlin bolts don't use washers.

tomtbone1993

eddie marine

tomtbone1993

still have studs & purchased Merlin bolts

jeff1000man

Should have everything you need. Did you order your rocker arms? Here the part number for the good stufff at JEGS. 270-13750-16

tomtbone1993

Tuesday should be the day

jeff1000man

Good luck

joew.

what is your goal datejeff

jeff1000man

Dyno scheduled for saturday 14th. have 1 week after that to install and rig. Test run weekend after and adjust week berore TF200.

Pie in the sky but doable.

jeff1000man

One getting close and one ready to go. I am doing paperwork for my job right now and will commence activity in a coulple of hours.