The B.S. Thread
12-14-2007, 05:27 PM
Registered
12-14-2007, 08:07 PM
Registered
Platinum Member
12-14-2007, 09:29 PM
Registered
Please tell me how this method is not correct? Looks like plenty of people have used this method and are happy with it.
sounds like i can fix it correctly without removing the engine.
Last edited by BY U BOY; 12-14-2007 at 09:37 PM.
12-15-2007, 08:07 AM
Registered
Join Date: Apr 2007
Location: Conroe, TX
Posts: 3,570
Likes: 0
Received 0 Likes
on
0 Posts
Yes you can fix it that way. I have the mercruiser manual and it also says you can drill a big hole in the side of it, then thread the hole, then screw in a plug when you are done. Which part is loose, the bolt that tightens your steering tiller, or the big nut that tightens the gimbal ring that is located above the tiller?
12-15-2007, 08:08 AM
Registered
Join Date: Apr 2007
Location: Conroe, TX
Posts: 3,570
Likes: 0
Received 0 Likes
on
0 Posts
12-15-2007, 09:19 AM
Registered
Yes you can fix it that way. I have the mercruiser manual and it also says you can drill a big hole in the side of it, then thread the hole, then screw in a plug when you are done. Which part is loose, the bolt that tightens your steering tiller, or the big nut that tightens the gimbal ring that is located above the tiller?
