65' Vette/automatic choke sticking problem
12-15-2005, 06:53 PM
#1
Registered
Thread Starter
Join Date: May 2003
Location: In the Mountains
Posts: 11,772
Likes: 0
Received 0 Likes
on
0 Posts
65' Vette/automatic choke sticking problem
Okay, what I thought was a clogged fuel filter now appears to be the automatic choke is sticking closed. Holley carb.
Took the air cleaner off and the throttle/butterfly valve was closed. Hitting the accelerator does not open it. There is this little red gizmo coming out of the "choke body" (plastic section on side of the carb) that seems to be the connecting rod to the rod that runs up to that throttle valve. If I push the little red gizmo down with my finger the throttle valve opens up about one quarter, maybe one third. It would appear that would be it's normal position. As soon as I hit the accelerator the throttle valve springs back into closed position, i.e., the choke is now "on".
My shop service manuals have not arrived yet. I've fiddled with it but not really getting anywhere. Anybody got any ideas???
Took the air cleaner off and the throttle/butterfly valve was closed. Hitting the accelerator does not open it. There is this little red gizmo coming out of the "choke body" (plastic section on side of the carb) that seems to be the connecting rod to the rod that runs up to that throttle valve. If I push the little red gizmo down with my finger the throttle valve opens up about one quarter, maybe one third. It would appear that would be it's normal position. As soon as I hit the accelerator the throttle valve springs back into closed position, i.e., the choke is now "on".
My shop service manuals have not arrived yet. I've fiddled with it but not really getting anywhere. Anybody got any ideas???
12-15-2005, 07:00 PM
#2
Registered
Join Date: Apr 2003
Location: Plano (Dallas), Texas
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
Re: 65' Vette/automatic choke sticking problem
[QUOTE
My shop service manuals have not arrived yet. I've fiddled with it but not really getting anywhere. Anybody got any ideas???[/QUOTE]
Sure do. Go here for the answers to any questions you can come up with about your vette.
http://forums.corvetteforum.com/forumdisplay.php?f=4
They have been veryu helpful with my questions for my 63 Vette.
Good Luck,
Jim
My shop service manuals have not arrived yet. I've fiddled with it but not really getting anywhere. Anybody got any ideas???[/QUOTE]
Sure do. Go here for the answers to any questions you can come up with about your vette.
http://forums.corvetteforum.com/forumdisplay.php?f=4
They have been veryu helpful with my questions for my 63 Vette.
Good Luck,
Jim
