Reciever
#1
Registered
Thread Starter
Join Date: Sep 2001
Location: Atlanta,GA
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
Reciever
Does anybody know the name and were I can get one of the recievers that swivels to help make lining up the ball to the trailer then when you get it hook up it locks in place back straight again.
#2
Registered
Join Date: Nov 2003
Location: Melbourne, FL
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
Re: Reciever
They are made by Schuck---in fact I had one listed one here way back. THey are around $300-400 and weigh 75 pounds. Link is http://www.schuckhitches.com/products.aspx?catID=1 I had the 750RTR.
#3
Forum Regulator
VIP Member
Re: Reciever
I picked up this:
http://www.cabelas.com/cabelas/en/te...h-results1.jsp
And it works great. I would not trust my towed load to an additional point of failure. On the swivel devices, you still have to have some accuracy. The ball does not move forward and back, but only in an arc motion. You still have to know when/where to stop. The mirror referenced above is priceless.
http://www.cabelas.com/cabelas/en/te...h-results1.jsp
And it works great. I would not trust my towed load to an additional point of failure. On the swivel devices, you still have to have some accuracy. The ball does not move forward and back, but only in an arc motion. You still have to know when/where to stop. The mirror referenced above is priceless.