Old Target Trailer setup
#1
Registered
Thread Starter
Old Target Trailer setup
My old Target trailer has vacuum over hydraulic breaks. I would like to convert this to either electric over hydraulic, or surge brakes. Could I possibly change the tongue to accept a surge actuator, or would the electric over hydraulic thing be better? It has huge brakes on all 3 axles, boat is a 40' excalibur. The trailer has been repainted since this pic, I know, it looks rough!
#2
Forum Regulator
VIP Member
If you are going through all that work, I'd convert it to Electric/Hydraulic, and forget about surge. WAY too much work for surge. As long as your coupler is sound, you should be able to get everything you need from www.championtrailerparts.com
Thread
Thread Starter
Forum
Replies
Last Post
Blue by You
Cigarette
5
03-26-2007 08:24 PM