Distribution tow bar?
06-25-2007, 07:56 AM
#21
Platinum Member
Platinum Member
Join Date: May 2005
Location: Magnolia, Texas
Posts: 2,124
Likes: 0
Received 0 Likes
on
0 Posts
06-25-2007, 08:16 AM
#22
Registered
Join Date: Jun 2001
Location: Lehigh Valley, Pennsylvania
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
My new trailer should be delivered in 2 weeks. Could I get a measurement as to how far back that unit gets mounted on the tongue? This trailers elec/hydraulic unit is mounted up in that area, not sure if would be in the way.
Last edited by SpeedGirl; 02-14-2012 at 12:35 PM.
06-25-2007, 09:12 AM
#23
Registered User
Platinum Member
I looked at putting a WD set-up on my trailer and the centerline of the pole tongue adapter should be 29" to 30" back from the centerline of the ball.
06-25-2007, 09:14 AM
#24
Platinum Member
Platinum Member
Join Date: May 2005
Location: Magnolia, Texas
Posts: 2,124
Likes: 0
Received 0 Likes
on
0 Posts
Mine was 30" back. Here is the detailed instructions:
http://www.equalizerhitch.com/pdf/eq...structions.pdf
http://www.equalizerhitch.com/pdf/eq...structions.pdf
06-27-2007, 05:48 PM
#25
Registered
Guys,
Tow a 419 sr1 with my 06250 crew cab and you guys talk of the air bags have some sag and would like to get some. Where do you get them and how much are they?? I have towed this boat many times over 500 miles and it tows like a dream. Thanks Mark
Tow a 419 sr1 with my 06250 crew cab and you guys talk of the air bags have some sag and would like to get some. Where do you get them and how much are they?? I have towed this boat many times over 500 miles and it tows like a dream. Thanks Mark
08-28-2007, 05:51 PM
#26
Registered
site. They were 230 for my Avalanche 2500. Man it tows much better- smoother over our rough Michigan roads. I 94 by you is ROUGH
Thread
Thread Starter
Forum
Replies
Last Post
miamioffshore
Trucks, Trailers and Transportation
27
03-22-2006 01:50 PM
