my "Winston Cup" 69 chevelle project
09-17-2011, 11:20 AM
#71
Registered
Thread Starter
Dave cut out, fabricated and installed new sail panels and gave them a couple skim coats of filler.
Last edited by pullmytrigger; 09-17-2011 at 01:36 PM.
01-23-2012, 05:30 PM
#74
Registered
Thread Starter
Wow, this Dave guy I had working on the car has kind of gone MIA since the last postings and I found another guy just today and now this ^^^ post....how weird is that!!??
heres some other pics.....the whole back filler area was full of holes so I cut it out and fabbed up some new pieces.
heres some other pics.....the whole back filler area was full of holes so I cut it out and fabbed up some new pieces.
Last edited by pullmytrigger; 01-23-2012 at 10:15 PM.
02-19-2012, 07:01 PM
#77
Registered
Thread Starter
Been at it....I need to use the stock rad cradle as it holds the headlight buckets etc....need a way to attach it to the car......will need a thicker piece of material but you get the idea
02-19-2012, 07:04 PM
#78
Registered
Thread Starter
Finalizing rocker reinforcement/attachment.....this will be the largest part of body that attaches to the chassis...welded straight on....no rubber bushings like the original Chevelle.
