C3 Corvette
#91
Platinum Member
Platinum Member
Thread Starter
sorted.............
#92
Platinum Member
Platinum Member
Thread Starter
Back together, gonna transfer some 91 out of the boat to the Vette see how it likes it.........
The following 5 users liked this post by F-2 Speedy:
articfriends (10-21-2021), dykstra (10-06-2021), HawkX66 (10-05-2021), lucky strike (10-05-2021), OldSchool (10-07-2021)
#93
Registered
The following 2 users liked this post by HawkX66:
dykstra (10-06-2021), F-2 Speedy (10-05-2021)
#95
Platinum Member
Platinum Member
Thread Starter
X66 are you running full roller ? was curious what push rod length you ended up with
#96
Registered
Here's what I came up with for measurements:
Push Rods
Intake 7 5/8"
7.625"+.020"+.039"=7.684"
Exhaust 8 9/16"
8.563"+.020"+.039"= 8.622"
241/249 @.050
Lift .625/.625
110 LSA
Last edited by HawkX66; 10-05-2021 at 07:04 PM.
The following users liked this post:
dykstra (10-06-2021)
#97
Platinum Member
Platinum Member
Thread Starter
I didn't get that technical, mine ended up at 7.5 & 8.5.............these rockers were about all they had in stock, Im also running a Lunati cam but different lifters, pattern on the valve stem looks good
#98
Registered
As long as your pattern is good you should be good to go.Here is what my pattern came out like:
Last edited by HawkX66; 10-06-2021 at 03:05 PM.
The following users liked this post:
dykstra (10-07-2021)
#99
Platinum Member
Platinum Member
Thread Starter
who ever told me to put a new tank in I should of listened, went to transfer some nitro-methane and drip drip drip..........................a new one is on the way
The following users liked this post:
dykstra (10-10-2021)