C3 Corvette
The following 4 users liked this post by JKetels:
#32
Platinum Member
Platinum Member
Thread Starter
knock off 42 years of dust looks pretty nice
#33
Platinum Member
Platinum Member
Thread Starter
Www.corvetteforum.com is a must join resource.
I live about 20 minutes from Zip Corvette, and have been there many times and have spent a lot of money there on my C5. My sister had a 1968 C3 327, and bought a fair amount of parts from them as well (sold it on BringATrailer).
I live about 20 minutes from Zip Corvette, and have been there many times and have spent a lot of money there on my C5. My sister had a 1968 C3 327, and bought a fair amount of parts from them as well (sold it on BringATrailer).
The following users liked this post:
Sydwayz (08-31-2020)
The following 3 users liked this post by lucky strike:
The following 3 users liked this post by lucky strike:
#36
VIP Member
VIP Member
I had this '72 from '07 or '08 until '14. 406CI/425 HP. It ran good and was a fun car! No AC forced a sale before moving to Florida...
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
The following 4 users liked this post by OldSchool:
#37
Registered
or what a C5/C6 is going for these days I think I will keep it as my daily for a few more years. I am averaging 24 mpg at 80 mph on the interstate.
The following users liked this post:
OldSchool (09-02-2020)
#38
VIP Member
VIP Member
20 years ago a friend had a 69 or 70 w 454- not sure if stock or not- Sitting at an intersection he said watch this- he nailed it- did a 360 before i even knew what hit us.
We just went home lol. Might have been some Drinking going on that day. Fun rides.
We just went home lol. Might have been some Drinking going on that day. Fun rides.
The following users liked this post:
F-2 Speedy (10-19-2021)
The following users liked this post:
F-2 Speedy (12-09-2020)
#40
Platinum Member
Platinum Member
Thread Starter
Ya, some guys on the Corvette forums said it was a nicely optioned car, the last item on the build sheet is an alarm, the heads are done, taking the block to the machine shop this morning, thinking of going full roller instead of flat tappet for a cam choice.
The following 4 users liked this post by F-2 Speedy: