LS project
#21
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
an additional 3 " C notch
![](https://cimg2.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/c_notch_7674edca9493b19f67c214a767362f18f681b5ea.jpg)
![](https://cimg2.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/c_notch_7674edca9493b19f67c214a767362f18f681b5ea.jpg)
The following users liked this post:
F-2 Speedy (07-05-2022)
#23
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
both sides done, full weld up next
![](https://cimg6.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/c_notch1_4b03129d7e4b250f6a91ecd96ecc146294b260a7.jpg)
![](https://cimg6.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/c_notch1_4b03129d7e4b250f6a91ecd96ecc146294b260a7.jpg)
#24
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
separated the cab, dissembling the frame and sending out for powder coat
![](https://cimg5.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/c10_d3ce53318b889431c9d3a31ec94bf3d4b065acc5.jpg)
![](https://cimg7.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/c10a_ef311624f31daac2c779205f43d7692bfca43a64.jpg)
![](https://cimg0.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/c10b_6d888fc957781552cb7652ce0982130ad1de1c68.jpg)
![](https://cimg5.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/c10c_3a550c89a15f10878e9a6febdbdb09fd3b4c0c46.jpg)
![](https://cimg5.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/c10_d3ce53318b889431c9d3a31ec94bf3d4b065acc5.jpg)
![](https://cimg7.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/c10a_ef311624f31daac2c779205f43d7692bfca43a64.jpg)
![](https://cimg0.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/c10b_6d888fc957781552cb7652ce0982130ad1de1c68.jpg)
![](https://cimg5.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/c10c_3a550c89a15f10878e9a6febdbdb09fd3b4c0c46.jpg)
The following 2 users liked this post by F-2 Speedy:
bencini231 (07-26-2022), dykstra (08-02-2022)
#25
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
headed to the powder coater Monday
![](https://cimg3.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/frame_ceaa581c0a863a478169685333cdc47c0e27bc0f.jpg)
![](https://cimg3.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/frame_ceaa581c0a863a478169685333cdc47c0e27bc0f.jpg)
#28
Registered
![Default](/forums/images/icons/icon1.gif)
Not that you didn't notice but change that dipstick tube right now. It is a M Effer with the body on. Once they are rusted too bad they break off in the block. If it does that best way to remove is screw in a coarse thread screw in to it and get ready for a fight. Install is also pain in the ass. Not only the oring has to be seated but the metal ring a few mm above it need to be flush.
This is the one you have.
Chris
This is the one you have.
Chris
#29
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I dont know what you're seeing ? theres no rust on the ds tube
![](https://cimg9.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/dipstick_tub_d386831ba475e9bbfb1ed9b70480b7a25793aaa9.jpg)
![](https://cimg9.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/dipstick_tub_d386831ba475e9bbfb1ed9b70480b7a25793aaa9.jpg)