LS project
08-30-2022, 04:47 PM
#31
Platinum Member
Platinum MemberThread Starter
Finally got the frame from the powder coater they said 2 weeks and it was almost a month........starting the assembly
The following users liked this post:
dykstra (08-31-2022)
08-30-2022, 04:49 PM
#32
Platinum Member
Platinum MemberThread Starter
The following users liked this post:
F-2 Speedy (08-31-2022)
The following users liked this post:
F-2 Speedy (08-31-2022)
09-10-2022, 05:55 PM
#35
Platinum Member
Platinum MemberThread Starter
few more
The following users liked this post:
dykstra (09-13-2022)
09-13-2022, 07:54 PM
#36
Registered
gonna be a sweet ride
The following users liked this post:
F-2 Speedy (09-14-2022)
09-15-2022, 09:24 AM
#37
Platinum Member
Platinum MemberThread Starter
?
09-15-2022, 04:25 PM
#39
Registered
Join Date: Jan 2007
Location: Murrayville Georgia
Posts: 1,848
Likes: 0
Received 926 Likes
on
335 Posts
you keeping the truck intake? curious why you were looking for different injectors. assume they are for this. is the motor so far from stock the original injectors would not work. just asking as I have a 2006 5.3 in my Cadillac and I just used the originals and rewired the harness but mine is all stock.
09-15-2022, 04:41 PM
#40
Platinum Member
Platinum MemberThread Starter
The old harness had been cut on and splices so I ordered a new one and it has the EV1 injector connectors where the old one has multec 2 connectors, so not wanting the hassle sending it back I was looking for a close OE flow injector with the EV1 connector. Smitty ( Articfriends ) is sending me a new set they flow a little more than OE the the ECM will self learn. Yes keeping this intake for now been told its the best in stock form.
