LS project
#61
Platinum Member
Platinum Member
Thread Starter
Looks like this intake although fuggly it performs pretty well
LS Truck Intake Dyno Shootout (motortrend.com)
LS Truck Intake Dyno Shootout (motortrend.com)
#64
Were doomed!
Charter Member
Looks like this intake although fuggly it performs pretty well
LS Truck Intake Dyno Shootout (motortrend.com)
LS Truck Intake Dyno Shootout (motortrend.com)
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
#65
Platinum Member
Platinum Member
Thread Starter
Holy smokes Wally Id rather pull the engines in my boat.........
The following users liked this post:
Wally (03-02-2023)
#66
Registered
If it wasn't so expensive to switch over I'd go with a Holley carb manifold and Sniper EFI setup.
#67
Platinum Member
Platinum Member
Thread Starter
I need some help from the LS folks can I change coil packs to the LS3, 5, 7 on this build will the plug and play with the 5.3 truck wiring harness, all the cool V covers are for these coils
Last edited by F-2 Speedy; 03-14-2023 at 09:35 AM.
#68
Registered
F2, are you on LS1tech forums?
If not might want to join. I'd guess lots of knowledgeable guys over there have been through all the same issues you're at hundreds of times.
If not might want to join. I'd guess lots of knowledgeable guys over there have been through all the same issues you're at hundreds of times.
#69
Platinum Member
Platinum Member
Thread Starter
good idea cheech, just joined
The following users liked this post:
cheech (03-14-2023)
#70
Registered