Transom Degree
#3
Registered
Thread Starter
Join Date: Jul 2006
Location: Virginia
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
I called and talked to Tim at the factory, he said it was a standard 24 degrees. Someone else told me it was 13 degrees and the standard was between 12 and 15. I am just trying to be certain before CMI makes this exhaust.
#5
Registered
Join Date: Sep 2002
Location: Charlotte, nc.
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
Call back and ask to speak with Steve himself. He will either answer or he will call you back.
#6
Registered
Thread Starter
Join Date: Jul 2006
Location: Virginia
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
Just got off the phone with Kenny at the factory, 24 degrees is the deadrise, 16 degrees is the transom angle. Just thought I would post this in case anyone else runs into the same problem.
#7
Registered
Did you end up going with the Unitops?