Info on 280 500HP
#1
Registered
Thread Starter
Join Date: Jan 2005
Location: Cicero, N.Y.
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Can anyone enlighten me as to the actual speed I can expect out of a 1999 280 Velocity with a 500HP motor? I am looking for either GPS or Stalker Radar numbers not the dream-o-meter. What prop was used? Labbed? As stated in another thread I will be taking delivery of said boat at the end of the month. I just sold a Baja 272 that had a 500HP with upgraded heads (Edelbrock Marine Rectangle Port) and the boat ran 72 on GPS. My hope is that the new boat would run at least 75, thoughts?
Thanks in advance!
Jeff
Thanks in advance!
Jeff
#4
Registered
Thread Starter
Join Date: Jan 2005
Location: Cicero, N.Y.
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Thanks for the info guys, I will post real nmbers once I splash the boat. A buddy of mine has a 27 pitch Hydromotive 4 blade that was labbed by Mike Hall, I am going to give that a try as well and if it works good I will be getting a duplicate just like it.
The only concern I have is that the boat has a low water pickup Bravo on it and I hear that they can scrub between 1-2 miles an hour. I have heard people say you should be able to drill the holes for the side pickup where they normally would be on a standard Bravo and plug the lower holes (Or add a nosecone to cover them) however I havent heard of anyone who has actually done it so I am leery; although I don't like the idea of 1-2 miles an hour being lost either.
At some point I will probably upgrade the heads to AFR 315's and put on CMI's so I can run high 70's but that may be a year away.
We'll see.....
The only concern I have is that the boat has a low water pickup Bravo on it and I hear that they can scrub between 1-2 miles an hour. I have heard people say you should be able to drill the holes for the side pickup where they normally would be on a standard Bravo and plug the lower holes (Or add a nosecone to cover them) however I havent heard of anyone who has actually done it so I am leery; although I don't like the idea of 1-2 miles an hour being lost either.
At some point I will probably upgrade the heads to AFR 315's and put on CMI's so I can run high 70's but that may be a year away.
We'll see.....
#7
Registered
Join Date: Oct 2004
Location: Long Island, New York
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
My 2001 28 with a 500 efi will run 78 mph light with one person. It's not all about top end, it's the ability to go fast when the water isn't smooth that makes Velocitys excell...
Imax
2001 Velocity 28' 500 EFI
1986 Velocity 22' 300x
Imax
2001 Velocity 28' 500 EFI
1986 Velocity 22' 300x
#9
Registered
Join Date: Oct 2004
Location: Long Island, New York
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Xcess,
I'm spinning the 26 Hydro that came with the boat, It's had a little work done by Mark at Long Island Propellers, mostly clean up and balance work. It didn't do much for the top end but gave me a more consistant bite.
Imax
I'm spinning the 26 Hydro that came with the boat, It's had a little work done by Mark at Long Island Propellers, mostly clean up and balance work. It didn't do much for the top end but gave me a more consistant bite.
Imax
#10
Brotherhood #1
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
I have a 28p Hydromotive behind a 26 TBred (280 velocity these days) Its pushed by a 509 blown B&M 250. I turn around 5500 and run low 80's ive ran 81.7 on gpps. And i noticed that threw ruff stuff runnin about 50 is sweet love my Velocity/TBred. If that helps you any....