VR-1 vs. 290SC
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Hey guys,
Thinking about getting one fo these boats for next summer. Can anybody tell me what the difference is between these 2 models?
Thanks.
Thinking about getting one fo these boats for next summer. Can anybody tell me what the difference is between these 2 models?
Thanks.
#2
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Join Date: Feb 2004
Location: Hollywood, MD
Posts: 1,212
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
as far as my understanding goes, the VR-1 is just a cut down 290SC. the VR-1 is also a better performer.
for the family - 290sc
for performance - VR-1
Depends on what you want to do with the boat.
for the family - 290sc
for performance - VR-1
Depends on what you want to do with the boat.
#5
Registered
Thread Starter
#6
Registered
Join Date: Feb 2003
Location: Middletown, DE
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
#9
Registered
Join Date: Nov 2003
Location: Umatilla, FL
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Drive both if you can! The center of gravity of the VR-1 is MUCH lower than the 290SC. The 290SC tends to "roll" side to side and fall off of the pad much easier. In my opion, the 496 mag HO isn't enough power for the 290SC.... it's too hard to keep it on the pad when you're trimed out. In a poker run situation, this can be sometimes scary to passengers. If you have any interest in running poker runs, the VR-1 is deffinently the right boat.
Also, their are some construction differences between the two: the 290SC has balsa coring in the hull, whereas the VR-1 is completely composite.
As mentioned earlier.... no one ever uses the enclosed head. A buddy of mine just built his 2nd 290SC (he has a small baby) and had the factory omit the head altogether to save weight. My wife and I took out the porta potti from our VR-1 after the first season.... I can almost always find her a private place to go off of the back of the boat (sometimes that can be a fun adventure!).
Let me know if you're interested in a really nice used VR-1.... I don't think you'll find another one as nice.
Good luck!
Also, their are some construction differences between the two: the 290SC has balsa coring in the hull, whereas the VR-1 is completely composite.
As mentioned earlier.... no one ever uses the enclosed head. A buddy of mine just built his 2nd 290SC (he has a small baby) and had the factory omit the head altogether to save weight. My wife and I took out the porta potti from our VR-1 after the first season.... I can almost always find her a private place to go off of the back of the boat (sometimes that can be a fun adventure!).
Let me know if you're interested in a really nice used VR-1.... I don't think you'll find another one as nice.
Good luck!
Last edited by CAVelocity; 08-31-2007 at 06:02 AM.
#10
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Drive both if you can! The center of gravity of the VR-1 is MUCH lower than the 290SC. The 290SC tends to "roll" side to side and fall off of the pad much easier. In my opion, the 496 mag HO isn't enough power for the 290SC.... it's too hard to keep it on the pad when you're trimed out. In a poker run situation, this can be sometimes scary to passengers. If you have any interest in running poker runs, the VR-1 is deffinently the right boat.
Also, their are some construction differences between the two: the 290SC has balsa coring in the hull, whereas the VR-1 is completely composite.
As mentioned earlier.... no one ever uses the enclosed head. A buddy of mine just built his 2nd 290SC (he has a small baby) and had the factory omit the head altogether to save weight. My wife and I took out the porta potti from our VR-1 after the first season.... I can almost always find her a private place to go off of the back of the boat (sometimes that can be a fun adventure!).
Let me know if you're interested in a really nice used VR-1.... I don't think you'll find another one as nice.
Good luck!
Also, their are some construction differences between the two: the 290SC has balsa coring in the hull, whereas the VR-1 is completely composite.
As mentioned earlier.... no one ever uses the enclosed head. A buddy of mine just built his 2nd 290SC (he has a small baby) and had the factory omit the head altogether to save weight. My wife and I took out the porta potti from our VR-1 after the first season.... I can almost always find her a private place to go off of the back of the boat (sometimes that can be a fun adventure!).
Let me know if you're interested in a really nice used VR-1.... I don't think you'll find another one as nice.
Good luck!