Bought engines today VV
#611
Crazy Energy
Platinum Member
Thread Starter
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
These guy's have gone above and beyond the call of duty with me and my picky ways so I thought the least I could do is advertise for them a little.
I am having my two spare tires covered with these custom tire covers.
We also took off the bow stop, winch stand and the jack stand and sent them off for a fresh powder coating the same color as my "Screaming Yellow" Truck.
As far as the trailer, we ordered two 15"L x3"W x4"Deep rubber bumpers for the drive guard.
We are also going to add a V aluminum piece at each corner of the rear of the trailer for a drag stop incase it drags on the pavement, if it wears out we will just add a new one instead of the trailer taking the beating.
Adding a ladder in the front of the trailer with one side inline and sticking high above the bow point so I can aim and see where I'm headed when loading the boat and be able to climb on and off the bow of the boat without killing myself. It will sorta look like the drawing but I am putting it on the other side away from the winch handle.
Good to see everyone getting along
I am having my two spare tires covered with these custom tire covers.
We also took off the bow stop, winch stand and the jack stand and sent them off for a fresh powder coating the same color as my "Screaming Yellow" Truck.
As far as the trailer, we ordered two 15"L x3"W x4"Deep rubber bumpers for the drive guard.
We are also going to add a V aluminum piece at each corner of the rear of the trailer for a drag stop incase it drags on the pavement, if it wears out we will just add a new one instead of the trailer taking the beating.
Adding a ladder in the front of the trailer with one side inline and sticking high above the bow point so I can aim and see where I'm headed when loading the boat and be able to climb on and off the bow of the boat without killing myself. It will sorta look like the drawing but I am putting it on the other side away from the winch handle.
Good to see everyone getting along
Last edited by Velocity Vector; 05-15-2009 at 08:05 PM.
#614
Registered
Join Date: Aug 2005
Location: Marietta, Ga.
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
Did you get rid of the old trailer already..............your making me nervous with the boat in that shop hanging!!!!
Can't wait to see how this episode turns out!! You always go above and beyond!!!
Can't wait to see how this episode turns out!! You always go above and beyond!!!
#615
Crazy Energy
Platinum Member
Thread Starter
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
Sold the trailer the same day this one arrived, The boat is supported on the boxes and in front too, not just hanging. I think it is going to be in the local new's paper, not much news where I live. Hee!
#616
Crazy Energy
Platinum Member
Thread Starter
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
More progress, I had them box in the whole drive guard for a nice clean look. Installed a plug for the lights on the left side inside the boxed frame. Added an extra set of LED tail lights. You can see the yellow jack, bow stop and winch, finders will also be yellow should be ready Mon. / Tues.
Last edited by Velocity Vector; 05-22-2009 at 09:56 PM.
#619
Registered
yes, yes VV, I appreciate you following my wishes and I expect no less, now when it's all done will you deliver it or is it necessary for me to pick up the package..... I would greatly appreciate delivery....