Next project is a CAT
#111
Crazy Energy
Platinum Member
Thread Starter
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
Thanks Johnny I'm thinking the same thing so I'm mounting it on one side or the other using a actuator to scope it up and down in and out of the sponson it will be flush with the deck when in the down position most likely using a hatch deck lid so you will never see it.
Last edited by Velocity Vector; 02-18-2012 at 09:34 PM.
#112
Crazy Energy
Platinum Member
Thread Starter
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
Mr. Bob gave me a Engine's update. Got a little bling bling going on.
Hopefully those highly polished chrome valve covers will be easier to clean than my old polished aluminum ones were.
Surely we can get 75 MPH out of these. those Stellings headers in the background will look nice on here with the 5" cannons
Hopefully those highly polished chrome valve covers will be easier to clean than my old polished aluminum ones were.
Surely we can get 75 MPH out of these. those Stellings headers in the background will look nice on here with the 5" cannons
Last edited by Velocity Vector; 02-18-2012 at 11:18 PM.
#113
Crazy Energy
Platinum Member
Thread Starter
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
Still chugging along with the Cat project. Gimbals are ready for epoxy primer and paint , and the engines are about 85% ready, then Bob can start on the boat once the engines are dynoed and the gimbals are together.