Next project is a CAT
#133
Registered User
Platinum Member
#135
Crazy Energy
Platinum Member
Thread Starter
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
Picked up few items today.
2- Eddie Marine polished Billet Vents. 17 3/4" X 2 1/2" for the side or back of race hatch
4- Eddie Marine Blue anodized Billet Vents 17" X 3" for the front of race hatch
2- Eddie Marine yellow anodized steps 13 3/4" X 3" For center step
2- Eddie Marine copper anodized grab handles 8 3/4" Where ever
1- Spargi Silver Steering Wheel It's a 13.8" diameter 3 Spoke
As you can see we will have a rainbow of colors, but we ain't gay! Also picked up these footrest for the passenger seats so we're thinking the 2 back seats need to go on each side of the cockpit instead of beside the steps in the middle so the footrest will be on each side of the cockpit and not honked out in the middle of the cockpit as shown in the last diagram design.
2- Eddie Marine polished Billet Vents. 17 3/4" X 2 1/2" for the side or back of race hatch
4- Eddie Marine Blue anodized Billet Vents 17" X 3" for the front of race hatch
2- Eddie Marine yellow anodized steps 13 3/4" X 3" For center step
2- Eddie Marine copper anodized grab handles 8 3/4" Where ever
1- Spargi Silver Steering Wheel It's a 13.8" diameter 3 Spoke
As you can see we will have a rainbow of colors, but we ain't gay! Also picked up these footrest for the passenger seats so we're thinking the 2 back seats need to go on each side of the cockpit instead of beside the steps in the middle so the footrest will be on each side of the cockpit and not honked out in the middle of the cockpit as shown in the last diagram design.
Last edited by Velocity Vector; 04-15-2013 at 04:03 PM.
#136
Crazy Energy
Platinum Member
Thread Starter
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
Donzi brother hooked me up again not only with the KE 2 stage pumps, but also an assortment of 12AN - 16AN Braided lines. Thanks!
Last edited by Velocity Vector; 04-18-2013 at 10:42 AM.
#137
Registered
Join Date: Feb 2003
Location: Middletown, DE
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
#138
Crazy Energy
Platinum Member
Thread Starter
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
Picked up a Garmin 740S today I stay lost without a GPS. We will dash mount this somewhere.
Last edited by Velocity Vector; 04-19-2013 at 08:58 PM.
#139
Crazy Energy
Platinum Member
Thread Starter
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
RAPTOR1 from the Velocity Family hooked old VV up today with a brand new Machine Marine tilt Steering unit. Thanks Charley!
And I found a 230CC Helm Valve
And I found a 230CC Helm Valve
Last edited by Velocity Vector; 04-22-2013 at 01:32 PM.
#140
Crazy Energy
Platinum Member
Thread Starter
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
Hint ---- when you buy a set of SSM #6's make sure they have the tie bar saddles with them. New they are over 2K each! Ouchy. We found these used but still pricey.
Last edited by Velocity Vector; 05-16-2013 at 08:17 PM.