StillCrazy Velocity...Resurrected
#222
Registered
Thread Starter
We've been hard at work and I haven't had a chance to upload my good pics. Here's a couple sneak peeks from my phone
1000001097 by JordanPoppa, on Flickr
And our sweet new engine room Mike and I painted last week...
2011-04-09_19-53-08_505 by JordanPoppa, on Flickr
A sneak peek of the shine on our baby
2011-04-10_14-57-02_332 by JordanPoppa, on Flickr
And the bottom Eddie finished painting this week.
1000001145 by JordanPoppa, on Flickr
1000001146 by JordanPoppa, on Flickr
I am headed over to Opa Locka tomorrow to work with Chris Dilling on the hatches and some more sanding and buffing. Rigging will start soon!
1000001097 by JordanPoppa, on Flickr
And our sweet new engine room Mike and I painted last week...
2011-04-09_19-53-08_505 by JordanPoppa, on Flickr
A sneak peek of the shine on our baby
2011-04-10_14-57-02_332 by JordanPoppa, on Flickr
And the bottom Eddie finished painting this week.
1000001145 by JordanPoppa, on Flickr
1000001146 by JordanPoppa, on Flickr
I am headed over to Opa Locka tomorrow to work with Chris Dilling on the hatches and some more sanding and buffing. Rigging will start soon!
#225
Registered
Join Date: Dec 2003
Location: Cleveland, OH / Pewaukee, WI
Posts: 5,887
Received 396 Likes
on
221 Posts
We've been hard at work and I haven't had a chance to upload my good pics. Here's a couple sneak peeks from my phone
1000001097 by JordanPoppa, on Flickr
And our sweet new engine room Mike and I painted last week...
2011-04-09_19-53-08_505 by JordanPoppa, on Flickr
A sneak peek of the shine on our baby
2011-04-10_14-57-02_332 by JordanPoppa, on Flickr
And the bottom Eddie finished painting this week.
1000001145 by JordanPoppa, on Flickr
1000001146 by JordanPoppa, on Flickr
I am headed over to Opa Locka tomorrow to work with Chris Dilling on the hatches and some more sanding and buffing. Rigging will start soon!
1000001097 by JordanPoppa, on Flickr
And our sweet new engine room Mike and I painted last week...
2011-04-09_19-53-08_505 by JordanPoppa, on Flickr
A sneak peek of the shine on our baby
2011-04-10_14-57-02_332 by JordanPoppa, on Flickr
And the bottom Eddie finished painting this week.
1000001145 by JordanPoppa, on Flickr
1000001146 by JordanPoppa, on Flickr
I am headed over to Opa Locka tomorrow to work with Chris Dilling on the hatches and some more sanding and buffing. Rigging will start soon!
#226
Registered
Join Date: May 2009
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Still Crazy
Awsome story. I can not believe I am just picking up on this now. Love the old boats and have a few in resto myselef. I am in Naples and own a business that includes aluminum fabrication, powder coating, polishing, small parts plating and media blasting. Please feel free to call me if there is anything we can do to help with the project. Always willing to donate to a GOOD cause Would also love to see the boat some day, I have seen pictures of this boat for the better part of my life. GOOD LUCK, David.
#228
Registered
Join Date: Sep 2002
Location: Manhasset, NY
Posts: 1,943
Likes: 0
Received 0 Likes
on
0 Posts
#229
Registered
Thread Starter
Hey everybody
Mike and I just got back from Sanford after working on the boat the last two days. The rigging process has started with the gas tanks in and plumbed, the floor glassed in, transom assemblies installed, tabs mounted. We are still sanding and polishing, which is quite a precise process we are finding. I think we're going to have the professionals (Cesar Guardado) finish it off as us two rookies just can't seem to get the final product we want and the boat deserves.
It looks like we're still on schedule for the Jacksonville Poker Run so I'm going to post a few pics from this weekend but leave the finished product to be unveiled at the run.
2011-05-08_16-23-51_903 by JordanPoppa, on Flickr
2011-05-08_16-23-42_563 by JordanPoppa, on Flickr
2011-05-08_16-26-49_200 by JordanPoppa, on Flickr
2011-05-08_16-26-59_235 by JordanPoppa, on Flickr
2011-05-08_16-28-15_99 by JordanPoppa, on Flickr
2011-05-08_16-28-27_653 by JordanPoppa, on Flickr
2011-05-08_16-27-13_536 by JordanPoppa, on Flickr
Mike and I just got back from Sanford after working on the boat the last two days. The rigging process has started with the gas tanks in and plumbed, the floor glassed in, transom assemblies installed, tabs mounted. We are still sanding and polishing, which is quite a precise process we are finding. I think we're going to have the professionals (Cesar Guardado) finish it off as us two rookies just can't seem to get the final product we want and the boat deserves.
It looks like we're still on schedule for the Jacksonville Poker Run so I'm going to post a few pics from this weekend but leave the finished product to be unveiled at the run.
2011-05-08_16-23-51_903 by JordanPoppa, on Flickr
2011-05-08_16-23-42_563 by JordanPoppa, on Flickr
2011-05-08_16-26-49_200 by JordanPoppa, on Flickr
2011-05-08_16-26-59_235 by JordanPoppa, on Flickr
2011-05-08_16-28-15_99 by JordanPoppa, on Flickr
2011-05-08_16-28-27_653 by JordanPoppa, on Flickr
2011-05-08_16-27-13_536 by JordanPoppa, on Flickr
#230
Registered
Thread Starter
Awsome story. I can not believe I am just picking up on this now. Love the old boats and have a few in resto myselef. I am in Naples and own a business that includes aluminum fabrication, powder coating, polishing, small parts plating and media blasting. Please feel free to call me if there is anything we can do to help with the project. Always willing to donate to a GOOD cause Would also love to see the boat some day, I have seen pictures of this boat for the better part of my life. GOOD LUCK, David.
PM me your number when you get a chance so I can get a hold of you. Mike and I are always up for meeting new people, especially those that share our passion for boats.
If all goes well we'll be in the water in under a month!
-Jordan