Need Opinions......
#21
Registered
Thread Starter
I had though about that as well. But I was looking at a lot of "Newer" offshore boats and they are using all carbon, so I figured it will give my boat a more modern look/feel. Not that 2003 is old..... But that is why I am going to look at the material laying on the seats to see if the grey carbon is overkill. Just waiting for the material to come in.
#22
Registered
Join Date: Oct 2000
Location: Ontario,Canada
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
If VV is out there maybe he can post a few of my interior pix. I used white pearl carbon fiber vinyl with a smooth but printed on orange tangerine panels. Maybe see if you can find any of my previous posts showing the interior, I tried but couldn't except for the buckets in the itchy and scratchy thread.
#23
Registered
Join Date: Oct 2000
Location: Ontario,Canada
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
#24
Registered
Thread Starter
Well I have had too much time to think about this interior. I dropped off all of the panels/seats a few weeks ago, however the material (vinyl) is not in yet so no work has begun which is leaving me time to change my mind, again..... Now I am thinking about not using black, instead using a charcoal carbon fiber vinyl. What do you guys think?
----black/silver/red
charcoal/silver/red
----black/silver/red
charcoal/silver/red
Last edited by low_psi; 01-25-2011 at 08:46 PM.
#26
Registered
Thread Starter
The supplier did not have enough silver in a single piece/roll. We are just waiting for the silver, which is supposed to be in in the next few days.
Last edited by low_psi; 01-25-2011 at 09:39 PM.
#29
Registered
Thread Starter
The work has finally begun. It has taken a while, but by the looks of the first panel, still not complete, it will be worth the wait. Here is a before and after pic. The "after" pic is not quite complete. It still needs the red piping and needs to be put together, but you can see how much better the new vinyl looks compaired to the factory vinyl.
Before:
After:
Before:
After:
#30
Registered
Thread Starter
This panel is supposed to be 100% completed tomorrow. I will post a pic of it then. I have changed my mind on colors numerous times. I actually changed my mind on placeement of colors on seat and sundeck once again today. Everytime I change my mind it cost me more $$ as he keeps having to order in new material. But in the end, it will be well worth the wait, and extra $$ I have spent to make sure it is EXACTLY what I want.