Cutting down the windshield
10-09-2012, 05:17 PM
#1
Registered
Thread Starter
Join Date: Apr 2003
Location: Punta Gorda
Posts: 1,838
Likes: 0
Received 0 Likes
on
0 Posts
Cutting down the windshield
My VR1 was originally a sit down race boat. The second owner put a smoked windshield on it . It looked good but man you cant see **** through it. I took it off and man what a difference. but the boat looks funny without it. So im going to try to cut it down to about 4 in. just to deflect a little wind and for esthetics.
10-09-2012, 06:48 PM
#2
Registered
Pics?
My VR1 was originally a sit down race boat. The second owner put a smoked windshield on it . It looked good but man you cant see **** through it. I took it off and man what a difference. but the boat looks funny without it. So im going to try to cut it down to about 4 in. just to deflect a little wind and for esthetics.
Cool project either way.
10-09-2012, 10:34 PM
#3
Registered
Platinum Member
Tom, the cut down fiberglass one off my 390 is at the factory. Not sure how it would fit a VR-1 but If you want it I'll leave it there when I pick up my boat.
10-10-2012, 08:12 PM
#5
Gold Member
Gold Member
My VR1 was originally a sit down race boat. The second owner put a smoked windshield on it . It looked good but man you cant see **** through it. I took it off and man what a difference. but the boat looks funny without it. So im going to try to cut it down to about 4 in. just to deflect a little wind and for esthetics.
