30' Velocity Bilge Redo...
#61
Registered
Ziemer,
Do you still have the one set of SM exhaust for sale? Anything salvageable from the other set? I need to replace my Gil risers and thinking the upgrade to SM would be nice.
Thanks,
Rick
Do you still have the one set of SM exhaust for sale? Anything salvageable from the other set? I need to replace my Gil risers and thinking the upgrade to SM would be nice.
Thanks,
Rick
#62
Gold Member
Gold Member
Thread Starter
Thanks!
#67
Gold Member
Gold Member
Thread Starter
Boat is done! Ran the boat this morning with 3 of us in the boat and without even trying ran 78 mph. (My engine guys Ipad actually read 81!)
Got the hatch on and everything buttoned up and got her back home today. Kenny did an amazing job and the boat came out great! I've got a couple stickers to add to the drives and I need to order some flappers, but other than that it's 100%. Over the next year, we'll re-skin the balance of the interior to match the work Brian Roberti did on the hatch and the boat will show like new. Bruce Baker with Express Engines is a perfectionist, and I couldn't be happier with his work. And even though we left the motors completely stock, I was treated just the same as those with the big dollar high HP motors that are much more frequent through his shop.
Here's a few pics from today and the last bits of the project.
Got the hatch on and everything buttoned up and got her back home today. Kenny did an amazing job and the boat came out great! I've got a couple stickers to add to the drives and I need to order some flappers, but other than that it's 100%. Over the next year, we'll re-skin the balance of the interior to match the work Brian Roberti did on the hatch and the boat will show like new. Bruce Baker with Express Engines is a perfectionist, and I couldn't be happier with his work. And even though we left the motors completely stock, I was treated just the same as those with the big dollar high HP motors that are much more frequent through his shop.
Here's a few pics from today and the last bits of the project.
Last edited by ziemer; 09-06-2015 at 04:47 PM.
#70
Gold Member
Gold Member
Thread Starter
Kenny Hohwiesner
LTB Performance
Brian Roberti Upholstery
(407) 402-0300
Bruce Baker
Express Engines
(866) 642-6358
LTB Performance
Brian Roberti Upholstery
(407) 402-0300
Bruce Baker
Express Engines
(866) 642-6358
Last edited by ziemer; 09-06-2015 at 04:46 PM.