VR1 Info
#2
Registered
Call the factory, they have them available and look awesome! My buddy just got one made for his 290. Hope all is well, I have not spoke with you since you sent me all of the dana1000 mounting location pictures, my tab install was perfect and Scott Mccormick also sent me a factory mounting location diagram. Unfortunately that boat was totaled last spring, I was hit head on, while in tow by a driver under the influence, but the silver lining was that we upgraded to a 2007 322 late last summer, im sure you know the boat (formerly known as the john deer boat). Single engine 700sci with a NXT drive, we absolutely love it. Good luck, but if you call Scott, you wont need any luck, he's got you covered!
#3
Registered
Thread Starter
WOW. Bummer about your Velocity being totaled. Glad you are OK. I wondered who bought the single engine 322. I was happy to see the listing dissappear as it was very tempting. LOL. What kind of speed are you getting? Great boat, congrats.
I'll check with Velocity. It will be great if I could get one right from Velocity. Does your buddy have any pics? I am betting the VR 1 and the 290 platform are the same.
Thanks
Padraig
.
I'll check with Velocity. It will be great if I could get one right from Velocity. Does your buddy have any pics? I am betting the VR 1 and the 290 platform are the same.
Thanks
Padraig
.
#4
Registered
So far I have only run her to 84gps, dragging tabs still.. I only got a few weeks of driving time with her this past summer, and the conditions were never favorable. She has plenty more to go, 90 shouldn't be a problem. The major difference i have noticed in this hull is how well it performs in rough water...its unbelievable, absolute wave crusher for a 32' boat. Here's a pic of my friends platform.
Last edited by formulavt; 02-24-2022 at 12:29 PM.
The following users liked this post:
SB (02-25-2022)
#6
Registered
Thread Starter
Ordered a swim platform pad from Velocity. Worked with Save in parts. Good guy, very helpful and attentive. It is nice to see customer service is like it was when Steve was there.
Thanks
Padraig
Thanks
Padraig
The following 4 users liked this post by Padraig:
#7
Registered
Can I ask what you paid for the pad? Thinking about doing the same on my 280.
The following users liked this post:
neuer_Typ (05-26-2022)
#9
Registered
Join Date: Feb 2016
Location: Orlando/ Daytona Beach
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts