Cutting Edge Series II props
#21
Registered
Join Date: Aug 2017
Location: Maryland
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
No, I talked to Auggie and he is currently developing a 5 blade prop more like the Max 5 that he has recommended for me. he is just casting it now so my props will not be any of the ones shown on the website. I am running twin Flashed* verado 350s with the HD 5.44 lower on a 30' Concept . going to run 23" and shooting for low 80s
#23
Offshoreonly Advertiser
Offshoreonly Advertiser
I ordered the same props around the end of November. Should be ready by March.
#26
Registered
Join Date: Aug 2017
Location: Maryland
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Those look amazing, I wonder what the difference between the 5 blades listed on the website and the max 5 style prop he is working on is. when I talked to him he said that the 5 blade currently available is basically a bravo 1 with an extra blade and. I know the max 5 is based of the same casting as the maximums then cut down.
#28
Registered
I bought a set of the 5 blades. Was not impressed. Had a ton of slip. Even tho they “look” like a P5X, they aren’t anywhere close. This talk of the max 5 clone has me thinking of giving them another shot however
#29
Registered
Thread Starter
So has anyone received any of their props, and tested them out? I bought a new set of Herings over the winter, if they don't work, I'll be looking for more prop options again.
#30
Offshoreonly Advertiser
Offshoreonly Advertiser
I received my props (Max 5 clone) from Cutting Edge. Haven't had a chance to use them because of weather.
__________________
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price