Cutting Edge Series II props
#42
Registered
#44
Registered
Thread Starter
What is your boat and power level? Also what pitch and gear ratio for your drives?
In my 37 AT I was getting 13% slip with the Maximus props prior to having them labbed to my hull. That was in relatively flat water. My numbers would be a bit better in 2-3 foot chop.
In my 37 AT I was getting 13% slip with the Maximus props prior to having them labbed to my hull. That was in relatively flat water. My numbers would be a bit better in 2-3 foot chop.
#46
Registered
#50
Offshoreonly Advertiser
Offshoreonly Advertiser
Finally tried my 28 pitch Cutting Edge 5 Blades. Getting on plane was better, no cavation, cruising speed is up by 2-4 mph and top speed is the same as before with a 28p Bravo 1 four blade. I'm impressed!!
__________________
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
Last edited by DiamondPerformance; 10-17-2019 at 07:09 PM.