#5 upper gears
#1
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Looking for #5 upper gears part number 43-847823a1 ratio 1.31
and yoke 44271 .
and yoke 44271 .
Last edited by TomFTM; 01-15-2009 at 05:30 PM.
#2
Banned
Join Date: Oct 2006
Location: Bradenton Florida
Posts: 5,927
Likes: 0
Received 0 Likes
on
0 Posts
#3
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
In my notes, for the gears that I bought/used in my #5 drives, the Mercury # that you list is for a 1.31 ratio, straight cut, net-forged upper gear set. I believe a 1.33 upper gear set, for a #5, was a spiral cut, polygon gear. Correct me if I'm wrong. Hope this helps. I do know where there are several sets of new 1.31 gears for #5 drives. E-mail me or call 763-473-8963 and I will give you the info.
#4
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
RMP, thanks , I was listing this for a friend , I posted the part numbers he gave me. I did not look them up. I will have him give you a call .
RMP . do you still have the k-plane trim pistons? Tom
DareD. Yes , I will have him call randy.
RMP . do you still have the k-plane trim pistons? Tom
DareD. Yes , I will have him call randy.