Wanted; Side by side front motor plates..
#1
Registered
Thread Starter
Wanted; Side by side front motor plates..
#2
Charter Member
Charter Member
I have a pair from a 38 Top Gun, good shape, could use a coat of paint.
Merc Part numbers 849310T and 849335T (Note-they are listed for staggered but this was a side by side boat, they are just shaved on the outside to allow more hull clearance if needed. $300 for the pair.
Merc Part numbers 849310T and 849335T (Note-they are listed for staggered but this was a side by side boat, they are just shaved on the outside to allow more hull clearance if needed. $300 for the pair.
#3
Registered
Thread Starter
I have a pair from a 38 Top Gun, good shape, could use a coat of paint.
Merc Part numbers 849310T and 849335T (Note-they are listed for staggered but this was a side by side boat, they are just shaved on the outside to allow more hull clearance if needed. $300 for the pair.
Merc Part numbers 849310T and 849335T (Note-they are listed for staggered but this was a side by side boat, they are just shaved on the outside to allow more hull clearance if needed. $300 for the pair.
Thanks,
Derek
#4
Registered
#6
Charter Member
Charter Member
Overall width is 27.5 inches. So bolt holes are like 26 or so on center.