jason y

i need one headbolt its the medium length one on the ends inside the valvecover. ive lost one from a set ..
just a stock bolt is what i need oldskool 454 mark block.

O.C.Barry

Jason - If you can give me the length, I'll check to see if i have one, If I do, you can have it.

Unlimited jd

ive got a box full i'll check in the a.m. make sure there ok and not rotted i can send you 1 of each size to make sure you get what you need

jason y

GREAT ill get my sets out tomorrow and wire wheel em down and make sure there all good and let your guys know exactly what i need... THANKS GUYS

ROTAX454

If they are that rusted and/or corroded, they should be replaced. These are fairly important holding devices. And, a complete set for both heads are not that expensive. Jegs and Summit has them in stock too.

jason y

still need to take care of this if any one has any I need at least one long one as that is what i miss placed i could use a few more as the heads on some are a lil pitted there still usable though if it comes down to it

O.C.Barry

Jason - If you post the bolt length you need. I'll check.

bunky1957

Bought a set this winter from headbolts.com about 40 bucks check their website

1983corsa31

I have a used set of big block mark 4 head bolts that you can have for free. just pay shipping.

Andy

New is $8, shipping from these fine fellas will be $10 min. Might as well get a whole set!