JAbsher

Looking for a pair of 177 or 174 blowers for rectangle heads. With carburetors preferred. Anybody looking to sell?

resurrected

How soon are you wanting them? I am considering going bigger this winter, I have 177's with like new chillers. Currently running Holley Sniper but I still have the carbs.
I'd sell both sets in September, intakes, chillers, blowers, carbs and fuel pumps. $6,000.00 US

phragle

Going to the sniper from the dom's any less thirsty???

resurrected

I don't have any real data on the carb setup. I broke a valve-spring into the second tank of gas owning it. I only ran a couple of tanks of gas through it last year before breaking a drive so no real consumption info. But the cold startup, tuning ability, information gathering and idle quality makes it a pretty nice package.

JAbsher

I’m hoping to find some sooner but if not I will definitely keep yours in mind.

resurrected

Sounds good

Inrecovery

I have a gen 4 454 fresh rebuild with heads and 174 b/m blower , no carb. Forged , valve job, new springs. felpro gaskets. Intake was mint shape. fresh water block. crane cam, lifters new melling oil pump. 8qt pan. balancer and flywheel. 5200.00 sold boat 717 554 9967

tmmii

I have two off of 525sc. Will be complete with flame arresters. I also have two chillers that I will be selling. One leaks but the core is replaceable and the other one I haven’t had a chance to check. I know I have a set of spare blower belts that I can put with them if I can find them. 6k for the blower setups, I’ll pressure check the other chiller and let you know the status if you are interested.

10mfountain

have a complete set up pair 250 B & M if interested

JAbsher

I have found a pair of 177’s from 525sc’s but it isn’t a done deal yet. If it falls through I will message you about the 250’s. Are they set up for dual carb or single?