Offshoreonly.com
0 2023/03/16 07:25:28
0 2023/03/16 07:25:26
0 2023/03/16 07:25:23
Let me throw this out. Say you got a 4 or 5 speedmaster on a box or a bravo and a stellings box. If your close to the transom and are running a short driveshaft, These mounts will allow an up/down adjustment to help reduce u joint angle when moving the box from the middle to eitjer the top or bottom holes. (I'll measure and picture the amount of adjustability if anyone's interested) safe to say at least 1/2 inch in either direction.
Let me throw this out. Say you got a 4 or 5 speedmaster on a box or a bravo and a stellings box. If your close to the transom and are running a short driveshaft, These mounts will allow an up/down adjustment to help reduce u joint angle when moving the box from the middle to eitjer the top or bottom holes. (I'll measure and picture the amount of adjustability if anyone's interested) safe to say at least 1/2 inch in either direction.
0 2023/03/10 06:29:18
0 2023/03/07 11:50:22
0 2023/03/07 11:50:13
0 2023/03/06 13:37:54
0 2023/03/06 13:37:48
0 2023/03/06 13:37:41
Not a scratch on it, i'll have to look up the price.
Not a scratch on it, i'll have to look up the price.
0 2023/03/06 13:37:35
0 2023/03/06 13:37:29
Super secret mercury alignment tool for bravo. It aligns the drive bellhousing with the gimble bearing. Use feeler gauges to make it 100% aligned the way the old TRS drives were done, ithink the speedmasters too.
Super secret mercury alignment tool for bravo. It aligns the drive bellhousing with the gimble bearing. Use feeler gauges to make it 100% aligned the way the old TRS drives were done, ithink the speedmasters too.
0 2023/03/06 13:37:24
0 2023/03/06 13:37:17
0 2023/03/06 13:37:10
0 2023/03/06 13:37:04
Brand new NLA mercury single engine front mount never used. Paid 300 plus shipping, take 300 plus shipping.
Brand new NLA mercury single engine front mount never used. Paid 300 plus shipping, take 300 plus shipping.
0 2023/03/06 13:36:58
0 2023/03/06 13:36:52
Not sure what these are worth, virtually prices tho
Not sure what these are worth, virtually prices tho
0 2023/03/06 13:36:46
0 2023/03/06 13:36:39
0 2023/03/06 13:36:33
These are front and rear aluminum gussets for pedestal mounts ( TRS 30 scarab) inperfect condition, sanblasted zinc chromated and boxed up years ago. Could be used for twin bravo front mounts too.
These are front and rear aluminum gussets for pedestal mounts ( TRS 30 scarab) inperfect condition, sanblasted zinc chromated and boxed up years ago. Could be used for twin bravo front mounts too.
0 2023/03/06 13:36:27
In bags, clean and new. Like to sell both 496 mounts and the mercury rear gussets, and front block pad mounts for 350 plus shipping
In bags, clean and new. Like to sell both 496 mounts and the mercury rear gussets, and front block pad mounts for 350 plus shipping
0 2023/03/06 13:36:21
0 2023/03/06 13:36:15
The idea is that 4 big nuts and the engine comes out without crawling under there and unbolting the typical plates off vertical angles that are bolted to the stringers
The idea is that 4 big nuts and the engine comes out without crawling under there and unbolting the typical plates off vertical angles that are bolted to the stringers
0 2023/03/06 13:36:09
So they could be used as either a singlle engine driveline set up. (The front stamped block mounts are used)
So they could be used as either a singlle engine driveline set up. (The front stamped block mounts are used)
0 2023/03/06 13:36:03
The idea was to have the ears welded on to convert both mounts to single engine (The cast iron rear gussets bolt to either a borg warner transmission or a bravo driveline bearing housing)
The idea was to have the ears welded on to convert both mounts to single engine (The cast iron rear gussets bolt to either a borg warner transmission or a bravo driveline bearing housing)
0 2023/03/06 13:35:56
0 2023/03/06 13:35:49
Gil 496 mounts for twins.
Gil 496 mounts for twins.
0 2023/03/06 13:35:42
0 2023/02/26 12:25:17
0 2023/02/26 12:25:11
0 2023/02/26 12:25:05
Armrests are 8 inches over seat, bottom of the tray table is 10 inches, put 3 inch longer uprights on this frame and it's perfect
Armrests are 8 inches over seat, bottom of the tray table is 10 inches, put 3 inch longer uprights on this frame and it's perfect
0 2023/02/26 12:24:59
0 2023/02/26 12:24:53
0 2023/02/26 12:24:47
0 2023/02/26 12:24:41
0 2023/02/26 12:24:34
Its at least strong, the armrests support full body weight and bounce.
Its at least strong, the armrests support full body weight and bounce.
0 2023/02/26 12:24:28
Made the 3rd frame work, it just needed a bead laid across the right rear foot. 2 pieces of 32 thou coupons would correct the rocker.
Made the 3rd frame work, it just needed a bead laid across the right rear foot. 2 pieces of 32 thou coupons would correct the rocker.
0 2023/02/26 12:24:20
0 2023/02/23 07:17:59
0 2023/02/23 07:17:55
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.