Offshoreonly.com
When mine get skinned, gonna use the vinyl ester
When mine get skinned, gonna use the vinyl ester
0 2023/01/03 08:00:42
Theres this fog that i think is the surfacing wax which i was told it needed, a few pages back the silmar 249 was sprayed on the orange/black seat w/ the celtic cross and it had the same fog, thought at the time it was a dirty compressor.
Theres this fog that i think is the surfacing wax which i was told it needed, a few pages back the silmar 249 was sprayed on the orange/black seat w/ the celtic cross and it had the same fog, thought at the time it was a dirty compressor.
0 2023/01/03 08:00:37
0 2023/01/03 08:00:32
It has a 5 minute pot life, super thin, and only the youtube stars apply it perfectly flat and smooth like a mirror.
It has a 5 minute pot life, super thin, and only the youtube stars apply it perfectly flat and smooth like a mirror.
0 2023/01/03 08:00:28
I was told this resin is the way to but my opinion theres gotta be a better option. Silmar 249 surfboard resin, dries clear and is uv but only the youtube stars can sand it with high grits to polish.
I was told this resin is the way to but my opinion theres gotta be a better option. Silmar 249 surfboard resin, dries clear and is uv but only the youtube stars can sand it with high grits to polish.
0 2023/01/03 08:00:23
Don't mask off thinking it will make less mess, it only screws up the nice cut line you started with. Sorry buddy, your seats gonna have a little wider pinstripe back there.
Don't mask off thinking it will make less mess, it only screws up the nice cut line you started with. Sorry buddy, your seats gonna have a little wider pinstripe back there.
0 2023/01/03 08:00:18
Instead, pull the tape and just go for it, less mess with near perfect seam.
Instead, pull the tape and just go for it, less mess with near perfect seam.
0 2023/01/03 08:00:13
Seams between the 2 pieces get pinstripes outta thickened and tinted resin
Seams between the 2 pieces get pinstripes outta thickened and tinted resin
0 2023/01/03 08:00:09
Heres the cut/seam in better light.
Heres the cut/seam in better light.
0 2023/01/03 08:00:04
Take it outside to spray the glue and mask the cut line so the material doesnt stick past the tape for a cleaner cut.
Take it outside to spray the glue and mask the cut line so the material doesnt stick past the tape for a cleaner cut.
0 2023/01/03 07:59:59
Dont use spray glue in the house, even a light dusting goes all over !
Dont use spray glue in the house, even a light dusting goes all over !
0 2023/01/03 07:59:54
4 layers of 1/4 fine line to get the cut line /seam. No way to skin these in 1 piece without 2 helpers who have long enough attention span to hold and not wrjnkel the material
4 layers of 1/4 fine line to get the cut line /seam. No way to skin these in 1 piece without 2 helpers who have long enough attention span to hold and not wrjnkel the material
0 2023/01/03 07:59:49
A round of filler tinted black ans some 80 grit
A round of filler tinted black ans some 80 grit
0 2023/01/03 07:59:42
0 2022/12/31 12:29:21
0 2022/12/31 12:29:16
0 2022/12/31 12:29:11
0 2022/12/31 12:29:07
0 2022/12/31 12:29:03
0 2022/12/31 12:28:58
0 2022/12/30 05:55:19
0 2022/12/30 05:55:14
0 2022/12/30 05:55:09
0 2022/12/23 15:55:04
0 2022/12/23 15:55:01
I owe the guy that invented pva a beer, he must have sucked at wet sanding a mold to hi polish but still needed to pop parts. Or i owe him a punch in the mouth because without it the whole thing would've gone in the trash months ago,the time and money i spent on this could've been wasted some other way.
I owe the guy that invented pva a beer, he must have sucked at wet sanding a mold to hi polish but still needed to pop parts. Or i owe him a punch in the mouth because without it the whole thing would've gone in the trash months ago,the time and money i spent on this could've been wasted some other way.
0 2022/12/23 15:54:56
Discoloration is pva that hasn't been hoesd off yet.
Discoloration is pva that hasn't been hoesd off yet.
0 2022/12/23 15:54:51
#5 popped right out, 4&5 got the mold seam filled w/ parting wax instead of clay, way better results.
#5 popped right out, 4&5 got the mold seam filled w/ parting wax instead of clay, way better results.
0 2022/12/23 15:54:46
Got another snack tray out of that mold, 3 more to go and they need to be 1-1/2 mat.
Got another snack tray out of that mold, 3 more to go and they need to be 1-1/2 mat.
0 2022/12/23 15:54:41
Gel coat cannot be brushed, impossible unless your a youtube star. It had to be filled and sanded smooth (ish) w/ 1500 on the d.a.
Gel coat cannot be brushed, impossible unless your a youtube star. It had to be filled and sanded smooth (ish) w/ 1500 on the d.a.
0 2022/12/23 15:54:35
Last seat in the mold.
Last seat in the mold.
0 2022/12/21 17:31:55
0 2022/12/21 17:31:50
Like i never screwed it up
Like i never screwed it up
0 2022/12/21 17:31:46
0 2022/12/21 17:31:41
0 2022/12/21 17:31:37
0 2022/12/21 17:31:32
0 2022/12/21 17:31:28
0 2022/12/21 17:31:23
Put the round headrest back to square
Put the round headrest back to square
0 2022/12/21 17:31:19
0 2022/12/21 17:31:15
0 2022/12/21 17:31:10
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.