Offshoreonly.com
0 2019/02/07 18:10:42
0 2019/02/07 18:10:41
0 2019/02/07 18:10:40
0 2019/02/07 18:10:31
0 2019/02/07 18:10:27
0 2019/01/17 07:17:19
0 2019/01/17 07:17:19
Both mounts modified and finished welded
Both mounts modified and finished welded
0 2019/01/17 07:17:18
After taking 1.75” out of the mount there wasn’t much meat left so in goes a gusset
After taking 1.75” out of the mount there wasn’t much meat left so in goes a gusset
0 2019/01/17 07:10:44
Built a jig to ensure both mounts have the same 9” offset and where they mount to the aluminum angle is square and in line with eachother
Built a jig to ensure both mounts have the same 9” offset and where they mount to the aluminum angle is square and in line with eachother
0 2019/01/17 07:10:44
0 2019/01/17 07:10:31
Before and after on the front mount
Before and after on the front mount
0 2019/01/17 07:09:55
0 2019/01/17 07:05:55
0 2019/01/17 07:05:54
0 2019/01/17 07:05:47
0 2019/01/17 07:05:46
0 2019/01/17 07:05:45
0 2019/01/17 07:03:50
0 2019/01/17 06:59:55
Rear mount
Rear mount
0 2019/01/17 06:59:50
Front mount
Front mount
0 2019/01/17 06:59:50
In order to move the motors in-board the mounts needed clearancing on the tunnel and moved down further aswell for a lower COG
In order to move the motors in-board the mounts needed clearancing on the tunnel and moved down further aswell for a lower COG
0 2019/01/17 06:59:38
0 2019/01/17 06:55:12
0 2019/01/17 06:55:09
Clearance the mount for the tunnel
Clearance the mount for the tunnel
0 2019/01/17 06:55:01
0 2019/01/17 06:49:41
0 2019/01/08 19:29:54
0 2019/01/08 19:28:57
I’ll just leave this here for a bit. More pics to come of the inside :/
I’ll just leave this here for a bit. More pics to come of the inside :/
0 2019/01/07 20:01:37
Some friends came over to check the progress out and lend a hand- Thanks Mike, Logan, Nate, John, and Joe
Some friends came over to check the progress out and lend a hand- Thanks Mike, Logan, Nate, John, and Joe
0 2019/01/07 20:01:33
The guy who got my into boating, snowmobiling, dirtbiking, and wrenching!
The guy who got my into boating, snowmobiling, dirtbiking, and wrenching!
0 2019/01/07 20:01:29
0 2019/01/07 19:48:29
0 2019/01/07 19:48:28
Aluminum stringer brackets from skater along with the motor mounts
Aluminum stringer brackets from skater along with the motor mounts
0 2019/01/07 19:48:25
Notice how close the top of the I-Beam attachment is to the garage door frame ;)
Notice how close the top of the I-Beam attachment is to the garage door frame ;)
0 2019/01/07 19:48:22
0 2019/01/07 19:48:21
Living in Michigan I didn’t want to store the trailer outside for the winter as I have work to do on it yet and didn’t want to accumulate too much surface rust. To be able to put the motors in I took the axles out from under neath the trailer
Living in Michigan I didn’t want to store the trailer outside for the winter as I have work to do on it yet and didn’t want to accumulate too much surface rust. To be able to put the motors in I took the axles out from under neath the trailer
0 2019/01/07 19:37:13
I built them to fit any cat. The uprights can be slid in and out To achieve the perfect tunnel width. After building them I was messing around before paint and figured shoot they would work for a V bottom boat as well if the uprights were put on oppsing sides and the 4X4 placed on the inside of the angle iron. I have yet to test them yet. Only thing I wish I would have done is put bigger casters on them. They are 3” and rated to 1000lbs - bigger casters never hurt
I built them to fit any cat. The uprights can be slid in and out To achieve the perfect tunnel width. After building them I was messing around before paint and figured shoot they would work for a V bottom boat as well if the uprights were put on oppsing sides and the 4X4 placed on the inside of the angle iron. I have yet to test them yet. Only thing I wish I would have done is put bigger casters on them. They are 3” and rated to 1000lbs - bigger casters never hurt
0 2019/01/07 19:37:12
I built some carts that support the boat under the strike just as the trailer does. I was going to put these under the boat to get it as low as possible to the ground to be able to rig the motors inside the 14’ tall ceiling barn.
I built some carts that support the boat under the strike just as the trailer does. I was going to put these under the boat to get it as low as possible to the ground to be able to rig the motors inside the 14’ tall ceiling barn.
0 2019/01/07 19:37:07
0 2019/01/07 19:34:58
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.